PZ Sheet Pile Connectors

PZ corners are fabricated from PZ piles and are usually cut and re-welded to make the desired section. This process offers a lot of flexibility in the production of corners.

 
  FC Connector
The FC is made by putting a bend in the flange of the female lock. The length and angle of the bend can vary widely. 

 
  MC Connector
The MC is made by putting a bend in the flange of the male lock. The length and angle of the bend can vary widely.
 
  PZ T Connector
The PZ T pile is used to bring one wall off another at a specific location. The T is made by removing an interlock from a pile and welding it onto another pile.
 
The connectors below are covered by one or more patents by PilePro, LLC
     
 Cobra  Colt  Joker Bullhead SWC
     
 SWC 30 A
 SWC 60 A
 SWC 90 A
SWC 30 B SWC 60 B
     
SWC 90 B WOM/WOF WOM-XL/WOL-XL PZ 90 PZ Tee
PZT-S LBM/LBF